Yjet Gloss PP plastic self adhesive label with a high grab BS5609 adhesive 


A gloss white coated instant dry water based ink jet compatible plastic label with a high grab adhesive to BS5609 and white release liner.


Supplied die-cut to size and shape labels on rolls or slit to a continuous feed uncut roll, the material can be printed on with our range of dye and pigment ink digital based label printers. Works best with dye ink and may take a little longer to dry with pigment ink types and switching to 'cym' instead of 'cymk' mode may help speed drying as the black ink (k) takes the longest to set into the coating. The adhesive is a high grab latex based hot melt BS5609 type.  


The printed label can be used indoors. Water based ink is not generally good for outdoors but use of pigment ink will provide a longer life against sunlight and rain.    The high grab adhesive is latex based and strong,  provides a good water resistant performance and providing solid adhesion to uneven surfaces.   The gloss coating can start to break down in time if outdoors so extended use outside is not recommended.


The material has been tested in our works. KTEC GROUP provide a free print sample service that we recommend you use so that samples can be provided and tested in your own conditions of use. Please ensure to send in your artwork or print colour approval and test the printed surface with any chemicals or solvents that may come into contact with the label.  Test the adhesive to make sure it performs as expected when applied to your product or packaging.


Specification Face:

Grams per Square Metre: 68

Caliper Micron: 87

Specification Adhesive:

Permanent rubber based

Peel Adhesion: 22 Newton 

Surface Temperature: -40 +70 C

Specification Liner Backing:

Grams per Square Metre: 60

Caliper Micron: 51 

Honey colour

Print Friendly, PDF & Email