Cjet  High grab matt PP extra thick plastic labe


A matt white coated instant dry water based ink jet compatible extra thick faced plastic label with an high grab adhesive and white kraft release liner.


Supplied die-cut to size and shape labels on rolls or slit to a continuous feed uncut roll the material can be printed onto with our range of dye and pigment ink digital based label printers. Works well with dye ink or pigment ink and may take a little longer to dry with pigment ink types and switching to 'cym' instead of 'cymk' mode may help speed drying as the black ink (k) takes the longest to set into the coating.


The printed label can be used indoors. Water based ink is not generally good for outdoors but use of pigment ink will provide a longer life against sunlight and rain.    The high grab adhesive is latex based and unusually strong,  provides a good water resistant performance and providing solid adhesion to uneven surfaces.   The matt coating can start to break down in time if outdoors so extended use outside is not recommended.  The extra thick face can be useful to cover up any existing print.


The material has been tested in our works.  KTEC GROUP provide a free print sample service that we recommend you use so that samples can be provided and tested in your own conditions of use. Please ensure to send in your artwork for print colour approval and test the printed surface with any chemicals or solvents that may come into contact with the label.  Test the adhesive to make sure it performs as expected when applied to your product or packaging.


Specification Face:

Grams per Square Metre: 120

Caliper Micron: 85

Specification Adhesive:

Peel Adhesion: 25 Newton (28 on glass)

Surface Temperature: -20 +50 C

Specification Liner Backing:

Grams per Square Metre: 93

Caliper Micron: 81  

Suited to our automated dispensing and apply machines

Print Friendly, PDF & Email